Lazy Garden Kit

If you are looking for an easy way to start your garden, you've found it! Our Lazy Garden Kit has everything you need to be successful at starting a new garden or making your current plot even better, including ground cover, customized drip irrigation system, and pins. The ground cover is a heavy-duty, woven polypropylene fabric that provides many years of reliable results, resistant to punctures, tears, and weed growth. It is formulated to resist UV degradation, the design allows air, water, and nutrients to pass through. There's no need to cut or burn holes for your plants, this ground cover is a quick plant fabric with pre-cut slits for optimal plant spacing for your transplants or Seeds. Fabric/Material weight: 3.2 ounces. Two sizes are available: 15 ft x 30 ft or 15 ft x 20 ft. Fabric pins are provided.

The 15 ft. x 30 ft. ground cover has 7 rows of pre-cut slits that measure 36 inches in length with a 12-inch spacing in between each slit. These slits are perfect for planting carrots, garlic, radishes, swiss chard, and more; it also comes with 8 rows of pre-cut Xs that are spaced 24 inches apart, these spaces are great for planting vegetables such as lettuce, broccoli, tomatoes, cauliflower, peppers and more! The 15ft. x 20 ft. ground cover has 5 rows of pre-cut slits that measure 36 inches in length with a 12-inch spacing in between each slit; it also comes with 5 rows of pre-cut Xs that are spaced 24 inches apart.

This ground cover is reusable with an expected lifespan of 8-10 years.

Lazy Garden Kit 15' x 20' Includes:

1- Woven polypropylene fabric ground cover

72- fabric pins (for ground cover & irrigation components)

1 - 20 ft. Mainline Tubing

10- pre-cut drip lines -

10- goof plugs

10- transfer barbs

1 - Figure 8 end clamp

1 - 20 PSI Filter Regulator Combo

1 - Hole Punch

Lazy Garden Kit 15' x 30' Includes:

1- Woven polypropylene fabric ground cover

95- fabric pins (for ground cover & irrigation components)

1 - 30 ft. Mainline Tubing

15- pre-cut drip lines

15- goof plugs

15- transfer barbs

1 - Figure 8 end clamp

1 - 20 PSI Filter Regulator Combo

1 - Hole Punch

Drip Tape Irrigation Kit Requirements:

Water hose – connects to a 3/4″ water hose or 3/4″ spigot.

Pressure – PSI should be below 50 psi and 8 gallons per minute. Requires a flow rate between 0.4 to 8 gallons per minute. To calculate your flow rate, simply record the time (in minutes that it takes to fill a 5-gallon bucket with water. Then divide 5 by the time above to obtain your gallon-per-minute rate. For example, if it takes 30 seconds (0.5 minutes) to fill a 5-gallon bucket, your flow rate is 10 gallons per minute because:

5 gal / 0.5 min = 10 gal/min

Row length – Our tubing can be used on a maximum row length of 30 ft. at 20 psi. We don’t recommend using rows longer than 30 feet. If rows are too long, water will not be equally distributed throughout the tubing along the row.

Row number – With a flow rate of 5 gallons per minute, our tubing can support 300 feet of tubing. That’s the equivalent of 30 rows that are 10 feet long. To calculate how much tubing your system can support, first calculate your flow rate based on the example above. For example, if your flow rate is 8 gallons per minute, the maximum length of tape your system can support is 480 feet. The flow rate on the tubing is 0.5 gallons per emitter per hour. The emitter spacing is 6". Flow rate per foot/1 gallon per hour.